GVR Glass Artists Club upcoming events

NMO -Designing a Soap/Sponge Dish, Saturday, 8/15, 10:30-1:30 (08/15/2026)

Sat, 15 Aug 2026 17:30:00 GMT

Workshop Level: NEW MEMBERS ONLY (You are considered a new member for 6 months after joining.)

This workshop is offered to new members only. You are considered a new member for 6 months after joining.

Join us in this workshop to learn how to design and slump a soap dish/sponge dish. This dish will measure 6"x4" and will have a clear glass base and a top sheet of 6"x4" glass that can be opaque or transparent. You will have a chance to use embellishments (scrap glass, dots, stringers, etc.) to create a design on your dish. The instructors will have some embellishment materials for those who need them. There will be two firings - the initial firing, and the 2nd firing using a slump mold. Please bring $2.00 ($1.00 each) to pay for these two firings.

YOU MUST BRING THE FOLLOWING SUPPLIES TO THIS WORKSHOP:

* a sheet of 6"x6" sheet COE 96 glass for your base

* a sheet of 6"x6" colored glass (your choice of opaque or transparent)

* any embellishments you may want to use for your design - if you have them

General supplies to bring to class:

* Glass cutting tools: Toyo Cutter, Running Pliers, Grozers, Nippers, Cutting Surface (Quilt-type mats work best)

* Glues: Elmer’s (clear or white), Needle nosed bottle with non-aerosol hairspray

* Writing Tools: Black Sharpies (fine and regular), Pen & Pencil

* Other helpful items:Tweezers, Toothpicks, A carrying box for projects

* Safety Items: Safety glasses, Closed-toe shoes, Band-aids

* Bring a firing ticket!

For further assistance or questions, please contact the instructors:

Instructor Name - Judy Stodieck 763-516-1769

Assistant Name - Helaine Prince

CR Lap Grinder Training, Monday 08/17 @ 9:30 - 11:00 am (08/17/2026)

Mon, 17 Aug 2026 16:30:00 GMT

INTERMEDIATE LEVEL

Does your fired project have a wonky edge? Does your bowl wobble? Our lap grinder can help you. It uses ever finer grits to make your project smoother and more finished. In this training workshop, you will learn safety tips; how to set up the lap grinder; how to change wheels and clean them; and how to clean up the grinder at the end.

Please bring 1-3 fired projects to work on.

The lap grinder can be messy, especially the first time. Wear old clothes or an apron; and old closed toe shoes. I recommend you remove your rings, bracelets or watches; and tie back long hair.

This equipment training does not count toward the one-workshop-per-month.

Please contact Jayne Becker @ 209-890-5774 with any questions.

CR Lap Grinding Open Hour, Monday 08/17 @ 11:00-12:00 pm (08/17/2026)

Mon, 17 Aug 2026 18:00:00 GMT

Lap Grinding Open Hour

Open Hour is for those who have already been trained on the lap grinder and want to use it on their project(s).

The instructor, Jayne Becker, will be there to monitor and assist.

This equipment training does not count toward the one-workshop-per-month.

CL-Intro to Mosaics Register Through GVR Class time 9:30 AM to 12:30 PM (08/18/2026)

Tue, 18 Aug 2026 07:00:00 GMT

Registration through GVR

SG Abstract Geometric Desert Scene Tuesday, August 11 & 18 @ 9:30 - 12:30 pm (08/18/2026)

Tue, 18 Aug 2026 16:30:00 GMT

Workshop Level: Advanced Beginner and up : Can cut glass, grind and place glass in a pattern. Little guidance is necessary. Familiar with the stained glass skills.

You will need frames to border this piece while fitting pieces. The piece measures 8'W X 12"L. It is banner shaped so the actual side is 10" long. Two 10" frames, one 8" frame and two 4-5" frames. Smaller frames can be put together. Various colors of glass are used. I used as many scrap pieces as I could. The first day/week will be constructing the piece, the second day is for soldering and patina. This gives you an opportunity to practice all those stained glass skills and coming out with a beautiful southwest piece.

General supplies to bring to class:

Glass cutting tools: Toyo Cutter, Running Pliers, Grozers, Cutting Surface (Quilt-type mats work best)
Other supplies: pattern scissors, regular scissors, frames, pins, flux, solder, patina
Glass: various colors. Scraps could work just fine. Piece is 8X12.
Writing Tools: Black Sharpies (fine and regular), Silver Sharpie, Pencil
Other helpful items: A carrying box for projects
Safety Items: Safety glasses, Closed-toe shoes, Band-aids

For further assistance or questions, please contact the instructors:

Instructor Name: Stephanie Andrews @ 520-256-2680

Assistant Name: Paula Bonacorsi @ 802-461-6238

CL-Intro to Mosaics Register Through GVR Class time 9:30 AM to 12:30 PM (08/19/2026)

Wed, 19 Aug 2026 07:00:00 GMT

Registration through GVR

SG Stained Glass Iris Heart Wednesdays 08/19 & 08/26 @ 9:30 - 12:30 pm (08/19/2026)

Wed, 19 Aug 2026 16:30:00 GMT

Workshop Level: Intermediate: Able to design and create simple projects with minimal guidance; trained on all studio equipment.

In this class we will make an Iris flower design and attach it to a heart shaped wire form with an attached crystal.

The instructor will collect $2 for the ring and $1 for the crystal on the day of the class. The pattern will be provided.

General supplies to bring to class:

Glass cutting tools: Toyo Cutter, Running Pliers, Grozers, mat and push pins for the pattern.
For the pattern two shades of glass are used for the iris plus a small amount of accent color. You will also need green for the leaves. The amount of glass needed is minimal. A good time to use scraps.
Writing Tools: Black Sharpies (fine and regular), Pen & Pencil
Other helpful items: A carrying box for projects, 60/40 solder, gel flux and brush, black patina and brush, wax.

For further assistance or questions, please contact the instructors:

Instructor Name: Martha Nicolas @ (574) 780-1337

Assistant Name: Paula Bonacorsi @ (802) 461-6238

ST Let's Make Holiday Items to Sell Thursday August 20 @ 9:00 - 12:00 pm (08/20/2026)

Thu, 20 Aug 2026 16:00:00 GMT

All Members! Let's make holiday items to sell in front lobby.

Come make ornaments and holiday pieces to sell in our front lobby: Halloween, Thanksgiving, Hanukkah, Christmas ornaments, small dishes or plates. Our studio will be open early on Thursday @ 9:00 am for this event.

The club will sponsor firing fees!

Please bring your glass, tools and safety equipment, closed toe shoes required. There will be experienced members available to help new members as needed.

Printed patterns will be available at front desk by 8/8, many others available online on Pinterest and in our pattern books.

Proceeds will go to Food Bank and Studio Equipment fund. Come have fun with your fellow members!

Any questions please contact Laura Callejon @ 408-605-8749.

CANCELLED ST Board Meeting Thursday 08/20 @ 10:00 am to noon (08/20/2026)

Thu, 20 Aug 2026 17:00:00 GMT

GVR Glass Art Club Board Meeting has been cancelled....

FR Glass Swap and Sell - Thursday 08/20 @ 12:30 - 2:30 pm (08/20/2026)

Thu, 20 Aug 2026 19:30:00 GMT

Glass Swap & Sale in Frit Room....

Join us at the GVR Glass Studio to swap, buy and sell glass. No need to make a reservation, just come in and bring glass you'd like to swap or sell. It can be fusing glass, stained glass, stringers, dots and whatever else you'd like. No limits and no minimums.

Stop in and leave with something new!

CL-Intro to Mosaics Register Through GVR Class time 9:30 AM to 12:30 PM (08/21/2026)

Fri, 21 Aug 2026 07:00:00 GMT

Registration through GVR

Colorful 6" Hanging Pinwheel, Saturday, 8/22, 10:30-1:30 (08/22/2026)

Sat, 22 Aug 2026 17:00:00 GMT

INTERMEDIATE & ADVANCED Workshop:

Intermediate: Able to design and create simple projects with minimal guidance; trained on all studio equipment. Fusers are learning about special firing programs.

Join us in the classroom to make a colorful 6” pinwheel (using two colors) that can be used as a sun catcher.

This project is constructed by creating two layers of curved “swoop” shapes. The “swoops” will be cut from 3” wide strips of colored glass. Each layer uses approximately 13 “swoops”. The instructors will have swivel hangers available to buy for $1.25.

I really like the look of using all transparent, but you can use both transparent and/or opalescent.

You need to bring these materials for this workshop

* one 12”x3” strip & one 12”x6” strip of each color (transparent works best, but try to remember that the colors will overlap, so you want to have two colors that when overlapping will create a nice 3rd color)

* a thin black Sharpie

* a 12”x9” tile

* papyros cut to 8”x8”

General supplies to bring to class:

* Glass cutting tools: Toyo Cutter, Running Pliers, Grozers, Nippers, Cutting Surface (Quilt-type mats work best)

* Glues: Elmer’s (clear or white), Needle nosed bottle with non-aerosol hairspray

* Writing Tools: Black Sharpies (fine and regular), Pen & Pencil

* Other helpful items:Tweezers, Toothpicks, A carrying box for projects

* Safety Items: P-100 Mask, Safety glasses, Closed-toe shoes, Band-aids

* Bring a firing ticket - firing cost will be $3.50 - contour fuse.

For further assistance or questions, please contact the instructors:

Instructor: Judy Stodieck 763-516-1769

Assistant: TBD

CL NMO Website Orientation, Monday 08/24 @ 11:00 - noon (08/24/2026)

Mon, 24 Aug 2026 18:00:00 GMT

This session is to orient brand new members to the Glass Artists Club website (https://www.gvrglassartists.com).

Initial registration is limited to new members this month - if you are not a new member this month, please wait until 2 days before the session to register to give the opportunity for new members to register first.

In the session we will focus on the members only section of the website:

Your Profile - editing/updating
Calendar – signing up for events & registration policies
New Member "Start Here" page
Mold Catalog - Search capability
Member Forums – what they are, subscribing to forums you are interested in
Volunteering - Opportunities for new members, recording Volunteer hours
Glass Art Galleries – pictures of inspiration
Online Library – what information is there

Followed by a short Q&A session

To get full benefit from this session:

Bring your device (phone, ipad, laptop) that you use to access the website (no desktops!)
Know your website password – see below for help in advance

This website orientation does not count toward the one-workshop-per-month.

If you need help registering for this event because you can’t get on the website, please email the calendar administrators at events.gvrgac@gmail.com to register.

If you need help signing into the website, please email Alice at amckenzie@aol.com to set up a 10 minute session for private help prior to the session.

CL Mosaic 101 - Tuesday 08/25 & Friday 08/28 @ 9:30 - 12:30 pm (08/25/2026)

Tue, 25 Aug 2026 16:30:00 GMT

Beginner Level: This workshop is for those members who entered the Glass Club through Intro to Fusing or Intro to Stained Glass.

In this workshop you will learn the basic techniques for cutting mosaic glass pieces or tesserae and assembling your first mosaic project. You will create a colorful mosaic on flagstone while learning how to use many other substrates and materials in the process. There will be an assortment of patterns to choose from.

Glass and flagstone will be provided by the club. The club will also provide the tools to use in this workshop.

Member cost is $15.00.

Please contact the instructor for additional information:

Instructor: Lynn Daniels-Anderson @ 541-729-7773

Asst Instructor: Jim Owens @ 928-202-1623

Colorful fruit Bowl or Platter, Wednesday, 8/26, 9:30-12:30 (08/26/2026)

Wed, 26 Aug 2026 16:30:00 GMT

INTERMEDIATE LEVEL WORKSHOP: This workshop is for Intermediate and Advanced members: Intermediate: Able to design and create simple projects with minimal guidance; trained on all studio equipment. Fusers are learning about special firing programs.

In this workshop you will be constructing and designing a colorful platter or bowl using just clear scrap glass and different colors of frit (see picture).

This is a new technique that you may have seen some members designing in the studio. In preparation for this workshop you will need to decide in advance on the size, shape, and mold number for your project.

You must have the following supplies for this workshop:

* COE 96 clear glass cut to the size and shape of the mold you chose

* lots of COE clear scrap glass to build open spaces (that will be filled with medium frit)

* at least 3 colors, or more, of medium frit to fill in the open spaces (You'll need a fair amount of each color.)

* small spoon (to apply frit)

* small paintbrush (to move frit)

* cheap aerosol hair spray (such as Suave)

You will also need to bring the following general supplies listed below:

* Glass cutting tools: Toyo Cutter, Running Pliers, Grozers, Nippers, Cutting Surface (Quilt-type mats work best)

* Glues: Elmer’s (clear or white), Needle nosed bottle with non-aerosol hairspray

* Writing Tools: Black Sharpies (fine and regular), Pen & Pencil

* Other helpful items:Tweezers, Toothpicks, A carrying box for projects

* Safety Items: P-100 Mask, Safety glasses, Closed-toe shoes, Band-aids

* Bring a firing ticket! (The firing fees will be dependent on the size of your project.)

For further assistance or questions, please contact the instructors:

Instructor Name: Lee Donnelly 734-272-6485

Assistant Name: Judy Stodieck 763-516-1769

SG Stained Glass Iris Heart Wednesdays 08/19 & 08/26 @ 9:30 - 12:30 pm (08/26/2026)

Wed, 26 Aug 2026 16:30:00 GMT

Workshop Level: Intermediate: Able to design and create simple projects with minimal guidance; trained on all studio equipment.

In this class we will make an Iris flower design and attach it to a heart shaped wire form with an attached crystal.

The instructor will collect $2 for the ring and $1 for the crystal on the day of the class. The pattern will be provided.

General supplies to bring to class:

Glass cutting tools: Toyo Cutter, Running Pliers, Grozers, mat and push pins for the pattern.
For the pattern two shades of glass are used for the iris plus a small amount of accent color. You will also need green for the leaves. The amount of glass needed is minimal. A good time to use scraps.
Writing Tools: Black Sharpies (fine and regular), Pen & Pencil
Other helpful items: A carrying box for projects, 60/40 solder, gel flux and brush, black patina and brush, wax.

For further assistance or questions, please contact the instructors:

Instructor Name: Martha Nicolas @ (574) 780-1337

Assistant Name: Paula Bonacorsi @ (802) 461-6238

CL Mosaic 101 - Tuesday 08/25 & Friday 08/28 @ 9:30 - 12:30 pm (08/28/2026)

Fri, 28 Aug 2026 16:30:00 GMT

Beginner Level: This workshop is for those members who entered the Glass Club through Intro to Fusing or Intro to Stained Glass.

Glass and flagstone will be provided by the club. The club will also provide the tools to use in this workshop.

Member cost is $15.00.

Please contact the instructor for additional information:

Instructor: Lynn Daniels-Anderson @ 541-729-7773

Asst Instructor: Jim Owens @ 928-202-1623

NMO Cutting a Circle to design a Bowl, Saturday, 8/29, 10:30-1:30 (08/29/2026)

Sat, 29 Aug 2026 17:30:00 GMT

NEW MEMBER ONLY WORKSHOP

This workshop is for new members only. You are considered a new member for 6 months after joining

In this workshop you will have a chance to learn some of the techniques for cutiing a circle. The end product will be a shallow 8" bowl.

Once your circle is cut, you will have a chance to embellish it using materials such as: scrap glass, dots, frit, stringers, noodles, etc. The instructor will have some embellishment materials available for those who need them. Please have a design in mind. Your design can have a holiday or seasonal theme, or even be abstract. You can also get ideas from Pinterest.

You must bring the following supplies to this workshop:

* a PRECUT sheet of 9”x9” clear OR black opal COE 96 glass (If you need help cutting this, call Judy at 763.516.1769 the week before the workshop, and she'll meet you at the studio.)

* embellishment materials (scrap glass, dots, stringers, frit, etc), if you have some

YOU MUST ALSO BRING THE FOLLOWING BASIC FUSING MATERIALS:

* Glass cutting tools: Toyo Cutter, Running Pliers, Grozers, Nippers, Cutting Surface (Quilt-type mats work best)

* Glues: Elmer’s (clear or white), Needle nosed bottle with non-aerosol hairspray

* Writing Tools: Black Sharpies (fine and regular), Pen & Pencil

* Other helpful items:Tweezers, Toothpicks, A carrying box for projects

* Safety Items: Safety glasses, Closed-toe shoes, Band-aids

* Bring a firing ticket!

For further assistance or questions, please contact the instructors:

Instructor Name: Judy Stodieck 763.516.1769

Assistant Name: Sandy Stretcher

FR FREEZE & FUSE, Sat.8/29, 10:30-1 & 3pm (08/29/2026)

Sat, 29 Aug 2026 17:30:00 GMT

AN INTERMEDIATE AND ABOVE WORKSHOP:

Able to design and create simple projects with minimal guidance; trained on all studio equipment. Fusers are learning about special firing programs.

Let's make small flowers, leaves, animals and other fun shapes.

This will be a two-segment workshop ON THE SAME DAY. We will be using opal powdered frit mixed with water in silicone molds, which will then be frozen. Firing tickets will be completed at this time and tiles will be prepped for use in the afternoon session. We will take a break until 3:00 PM and return to remove the items from the molds which will then be placed on a 6 x 6 tile prepared with papyrus kiln paper. The tiles will go immediately into the kiln to be fired.

Items needed for this workshop:

* A P-100 Mask. No exceptions.

* Your favorite colors of opal powdered frit (transparent frit doesn't always work as well). You can purchase at Tucson Stained Glass (club discount available) order from Southwest Art Glass in Phoenix (you will have to order & have shipped to your home as there isn't enough time to wait for the usual monthly club delivery) or possibly obtain at the club swap meet on 8/24 at 12:30.

You could also ask if anyone has any specific colors to share/trade/sell on the Fusing Forum on the club website.

* A small paint brush

* A small needle nosed squirt bottle (available at the GAC store)

* An old electric toothbrush if you have one available.

* A small spoon, such as a baby spoon.

* Silicone molds will be provided or you may use your own.

* 6x6 tile (if you have one) or check ahead in the studio and sign one out. One tile per student.

* A 6 x 6 sheet of papyrus paper.

* Elmer's glue.

* Safety Items: P-100 Mask (NO Exceptions), Safety glasses, Closed-toe shoes, Band-aids

* Please wear your name badge.

* Bring a firing ticket!

For further assistance or questions, please contact instructors:

Kathryn Stevens 707-815-0725

Laura Callejohn 408-605-8749

FR FREEZE & FUSE, Sat.8/29, 10:30-1 & 3pm (08/29/2026)

Sat, 29 Aug 2026 22:00:00 GMT

AN INTERMEDIATE AND ABOVE WORKSHOP:

Able to design and create simple projects with minimal guidance; trained on all studio equipment. Fusers are learning about special firing programs.

Let's make small flowers, leaves, animals and other fun shapes.

Items needed for this workshop:

* A P-100 Mask. No exceptions.

You could also ask if anyone has any specific colors to share/trade/sell on the Fusing Forum on the club website.

* A small paint brush

* A small needle nosed squirt bottle (available at the GAC store)

* An old electric toothbrush if you have one available.

* A small spoon, such as a baby spoon.

* Silicone molds will be provided or you may use your own.

* 6x6 tile (if you have one) or check ahead in the studio and sign one out. One tile per student.

* A 6 x 6 sheet of papyrus paper.

* Elmer's glue.

* Safety Items: P-100 Mask (NO Exceptions), Safety glasses, Closed-toe shoes, Band-aids

* Please wear your name badge.

* Bring a firing ticket!

For further assistance or questions, please contact instructors:

Kathryn Stevens 707-815-0725

Laura Callejohn 408-605-8749

SG Project Completion Assistance Monday 08/31 @ 9:30 - 12:30 pm (08/31/2026)

Mon, 31 Aug 2026 16:30:00 GMT

ALL LEVELS

"Project Completion Assistance" is an opportunity to provide a structured time for you to work at the GAC-Stained Glass Studio on your unfinished stained-glass project no matter when you worked on it last. This will be a time for you to discuss with a stained-glass instructor any issue(s) you may have regarding your unfinished project and receive directions, suggestions and encouragement for you to complete your stained-glass creation.

Bring your own supplies needed to work on your project such as:

Glass cutting tools: Toyo Cutter, Running Pliers, Grozer, a Cutting Surface (Quilt-type mats work best),

Stained glass scissors and regular scissors
Writing Tools: Black and Silver Sharpies (fine and regular) markers
Other supplies: pins, copper foil, fid, flux (gel or paste), 60/40 solder, frames ruler, and your glass being used for your project, and a carrying box
Safety Items: Towel or a heat proof glove for soldering, mask (not a P-100), Safety glasses, Closed-toe shoes, Band-aids

PLEASE NOTE: there will be no cutting of glass on the clear plastic coverings on the “desk” counters

The studio will supply soldering guns and desk lighting.

For further assistance or questions, please contact the instructors:

Instructor - Shawneen Schmitt @ 414-659-6689

Instructor – Stephanie Andrews @ 520-256-2680

ST GVC Planning Committee Meeting Thursday, 09/03 @ 9:00 - 12:00 pm (09/03/2026)

Thu, 03 Sep 2026 16:00:00 GMT

GVC Planning Committee Meeting....

FR: Frit Room Reserved for SWAG Sorting - First Friday (09/04/2026)

Fri, 04 Sep 2026 18:00:00 GMT

This is a room reservation notice only. Signups for this activity are done in a separate notice to SWAG-group participants only.

FR Volunteers to Sort SWAG Order First Friday @ 11:00 -2:00 pm (09/04/2026)

Fri, 04 Sep 2026 18:00:00 GMT

This is the Volunteer Signup to sort SWAG orders for this month - First Friday of the month (The exceptions are July and January deliveries on second Friday). This is only being sent to the group of people who have expressed interest in assisting. We are limiting signups to avoid having too many people resulting in a backup in the process.

The start time is fluid, we get a text from SWAG when they are about 20-30 minutes away. Expect that time to be somewhere between 10:30 and 1. We aim to be completed with the sorting of the order by 3pm when the studio closes.

Thanks in advance for your help.

CW Equipment Training: Ring Saw Session, Monday 09/07 @ 9:00 - 10:30 am (09/07/2026)

Mon, 07 Sep 2026 16:00:00 GMT

ALL LEVELS

Instructor: Kathy Garceau @ (575) 418-8022

Whether you are a new member or a member who is a bit rusty and needs a refresher course, please join us for this training to learn all about the ring saw. We will discuss the various blades that are available and when and how to use them.

You will learn to cut intricate patterns in glass for your art projects. We will discuss the difference between our various blades; regular, slim, diachroic, mega, and speed blades, as well as when and how to use them.

(They may not all be in operation at the time of your training, but we will discuss and answer questions about the various ones.)

This training will also include step-by-step instruction on how to clean the machines after you have used them.

You may bring a project to practice your cutting. We will provide scrap glass and patterns for you to practice on.

This equipment training does not count toward the one-workshop-per-month.

Studio reserved for Kiln Operators Meeting Thursday 09/10 @ 9:00 am (09/10/2026)

Thu, 10 Sep 2026 16:00:00 GMT

Studio reserved for Kiln Operators Meeting....

FR Finance Committee Meeting Friday 09/11 @ 9:00 - 11:00 am (09/11/2026)

Fri, 11 Sep 2026 16:00:00 GMT

Finance Committee Meeting in Frit Room....

CR Equipment Training: Drill Press Sessions, Monday 09/14 @ 9:00 - 10:30 am (09/14/2026)

Mon, 14 Sep 2026 16:00:00 GMT

ALL LEVELS

Instructors: Anna Parker @ (503) 260-7166.

Whether you are a new member or a member who needs a refresher session, please join us for this training to learn all about the drill press and how to use it for your glass art projects.

Drill Press: You will learn to use the large and small drill presses. We will provide glass for you to make your own template to use as you practice drilling holes, or you may bring your own art piece to practice on.

We will use both the 1/8” & 1/4” size bits. **PLEASE REMEMBER TO BRING YOUR OWN DRILL BITS TO THE CLASS. Both the 1/8” and 1/4” can be purchased in the store.

This equipment training does not count toward the one-workshop-per-month.

SG 101 "Let's Make a Butterfly" - Monday 09/14 & Tuesday 09/15 @ 9:30 - 12:30 pm (09/14/2026)

Mon, 14 Sep 2026 16:30:00 GMT

Workshop level: Beginners in Stain Glass

This workshop is for club members who have joined through mosaics or fused glass and would also like to learn the techniques for stained glass.

You will be taught the copper foiling method and soldering stained glass in this two-day workshop. You will create a 6 x 8” stained glass butterfly.

We will provide you with the pattern, glass, and supplies needed to complete the project. Tools will be available for those students who do not have their own. There will be a selection of glass available so you can choose your own colors for the project.

You must bring your safety glasses and wear close-toe shoes.

Instructors: Shawneen Schmitt @ 414-659-6689 and Stephanie Andrews

Cost $15.00 payable to the instructor on the first day of class.

SG 101 "Let's Make a Butterfly" - Monday 09/14 & Tuesday 09/15 @ 9:30 - 12:30 pm (09/15/2026)

Tue, 15 Sep 2026 16:30:00 GMT

Workshop level: Beginners in Stain Glass

This workshop is for club members who have joined through mosaics or fused glass and would also like to learn the techniques for stained glass.

You will be taught the copper foiling method and soldering stained glass in this two-day workshop. You will create a 6 x 8” stained glass butterfly.

You must bring your safety glasses and wear close-toe shoes.

Instructors: Shawneen Schmitt @ 414-659-6689 and Stephanie Andrews

Cost $15.00 payable to the instructor on the first day of class.

SG Stained Glass Angel Nite Light Wednesday 09/16 & 09/23 @ 9:30 - 12:30 pm (09/16/2026)

Wed, 16 Sep 2026 16:30:00 GMT

Workshop level: Intermediate: this class is for students who know how to do stained glass but want to continue to learn.

We will be making a 4” x 4” angel night light. The pattern will be provided along with the night light kit. The instructor will collect $4 from each student for the night light kit. You can bring whatever glass colors you want to use or use scraps from the bins.

General supplies to bring to class:

Glass cutting tools: Toyo Cutter, Running Pliers, Grozers, Cutting Surface (Quilt-type mats work best)
Other supplies: pattern scissors, regular scissors, frames, pins, flux, solder, patina
Glass: various colors. Scraps could work just fine. Piece is 8X12.
Writing Tools: Black Sharpies (fine and regular), Silver Sharpie, Pencil
Other helpful items: A carrying box for projects
Safety Items: Safety glasses, Closed-toe shoes, Band-aids

For further assistance or questions, please contact the instructors:

Instructor Name: Martha Nicolas @ (574) 780-1337

Assistant Name: Paula Bonacorsi @ (802) 461-6238

ST Board Meeting Thursday 09/17 @ 10:00 am to noon (09/17/2026)

Thu, 17 Sep 2026 17:00:00 GMT

GVR Glass Art Club Board Meeting

FR Glass Swap and Sell - Thursday 09/17 @ 12:30 - 2:30 pm (09/17/2026)

Thu, 17 Sep 2026 19:30:00 GMT

Glass Swap & Sale in Frit Room....

Stop in and leave with something new!

RA Tile Saw Cutting and Training, Monday 09/21 @ 9:00 - 10:30 am (09/21/2026)

Mon, 21 Sep 2026 16:00:00 GMT

WORKSHOP LEVELS

Instructor: Kathy Garceau @ (575) 418 8022

Beginners: First time users! Learn how to safely cut thicker pieces of glass art such as “Pattern Bars” and “Scrap Boxes” (If you don’t know what these are, please ask a fellow member to let you take a look). Once you have created a pattern bar, scrap box, or other FUSED project that is thicker than 6mm (> 2 layers of glass), sign up for this training and BRING YOUR PROJECT with you to the training. No samples will be available.

Intermediate/Advanced: If you have attended this training before and you have created more items that need cutting, please feel free to sign up for a time slot.

Workshop location: Ramada

Time Slot scheduling: Please schedule yourself in one of the 15-minute sessions.

Learn to cut pattern bars (7 layers thick, fused glass bar) or scrap boxes (1/2” fused glass bar). **PLEASE DO NOT BRING UNFUSED SINGLE SHEETS OF GLASS OR FUSED GLASS THAT IS ONLY 2 LAYERS THICK.

This class is considered both an “equipment training” class and an “equipment access” opportunity. Beginners will learn how to safely use the tile saw, discuss basic set up and clean up as well as what material is appropriate for its use.

Please bring a magic marker for measuring and Vaseline to cover the lines before cutting.

This equipment training does not count toward the one-workshop-per-month.

CL, Components, Tuesday, 9/22, 9:30-12:30 (09/22/2026)

Tue, 22 Sep 2026 16:30:00 GMT

ALL LEVEL WORKSHOP

Beginner: Learning how to cut basic shapes and follow a line; familiar with basic tools and supplies. Fusers understand full, contour, tack, slump firing programs.

You will be making components for future projects. You are only limited by your imagination.

Bring ides of things you might want to make. We will share ideas. You will make whatever you want. There will be no required item to make. Please bring glass, decorating items, glues, etc. 9"x12" tile (these can be checked out), kiln paper to cover, firing slip,tools

General supplies to bring to class:

* Glass cutting tools: Toyo Cutter, Running Pliers, Grozers, Nippers, Cutting Surface (Quilt-type mats work best)

* Glues: Elmer’s (clear or white), Needle nosed bottle with non-aerosol hairspray

* Writing Tools: Black Sharpies (fine and regular), Pen & Pencil

* Other helpful items:Tweezers, Toothpicks, A carrying box for projects

* Safety Items: P-100 Mask, Safety glasses, Closed-toe shoes, Band-aids

* Bring a firing ticket!

For further assistance or questions, please contact the instructors:

Instructor Name: Linda Reed 425-231-3571

Assistant: Peggy Jordan 419-215-1747

SG Project Completion Assistance Tuesday 09/22 @ 9:30 - 12:30 pm (09/22/2026)

Tue, 22 Sep 2026 16:30:00 GMT

ALL LEVELS

Bring your own supplies needed to work on your project such as:

Glass cutting tools: Toyo Cutter, Running Pliers, Grozer, a Cutting Surface (Quilt-type mats work best),

Stained glass scissors and regular scissors
Writing Tools: Black and Silver Sharpies (fine and regular) markers
Other supplies: pins, copper foil, fid, flux (gel or paste), 60/40 solder, frames ruler, and your glass being used for your project, and a carrying box
Safety Items: Towel or a heat proof glove for soldering, mask (not a P-100), Safety glasses, Closed-toe shoes, Band-aids

PLEASE NOTE: there will be no cutting of glass on the clear plastic coverings on the “desk” counters

The studio will supply soldering guns and desk lighting.

For further assistance or questions, please contact the instructors:

Instructor - Shawneen Schmitt @ 414-659-6689

SG Stained Glass Angel Nite Light Wednesday 09/16 & 09/23 @ 9:30 - 12:30 pm (09/23/2026)

Wed, 23 Sep 2026 16:30:00 GMT

Workshop level: Intermediate: this class is for students who know how to do stained glass but want to continue to learn.

General supplies to bring to class:

Glass cutting tools: Toyo Cutter, Running Pliers, Grozers, Cutting Surface (Quilt-type mats work best)
Other supplies: pattern scissors, regular scissors, frames, pins, flux, solder, patina
Glass: various colors. Scraps could work just fine. Piece is 8X12.
Writing Tools: Black Sharpies (fine and regular), Silver Sharpie, Pencil
Other helpful items: A carrying box for projects
Safety Items: Safety glasses, Closed-toe shoes, Band-aids

For further assistance or questions, please contact the instructors:

Instructor Name: Martha Nicolas @ (574) 780-1337

Assistant Name: Paula Bonacorsi @ (802) 461-6238

ST Let's Make Holiday Items to Sell Thursday September 24 @ 9:00 - 12:00 pm (09/24/2026)

Thu, 24 Sep 2026 16:00:00 GMT

All Members! Let's make holiday items to sell in front lobby.

The club will sponsor firing fees!

Please bring your glass, tools and safety equipment, closed toe shoes required. There will be experienced members available to help new members as needed.

Printed patterns will be available at front desk by 8/8, many others available online on Pinterest and in our pattern books.

Proceeds will go to Food Bank and Studio Equipment fund. Come have fun with your fellow members!

Any questions please contact Laura Callejon @ 408-605-8749.

CL Mosaic Birdhouse Friday 10/02 & Tuesday 10/13 @ 9:30 - 12:30 pm (10/02/2026)

Fri, 02 Oct 2026 16:30:00 GMT

Workshop Level - Intermediate: Able to design and create simple projects with minimal guidance; trained on all studio equipment.

Students will mosaic and grout a wooden bird house that will be provided by Instructor. Glass and grout to be provided by instructor. Students will pay the instructor $16 the first day of class for supplies provided by the instructor. It will be helpful to review some design ideas in advance.

General supplies to bring to class:

Day One:

Glass cutting tools: Toyo Cutter, Running Pliers, Grozers, Nippers, Cutting Surface (Quilt-type mats work best)
Glues: Weldbond Glue
Writing Tools: Black Sharpies (fine and regular), Pen & Pencil
Rags
Tweezers
Painters Tape
SAFETY ITEMS REQUIRED: Safety Glasses, Closed-toe Shoes

Day Two:

Small container such as yogurt or sour cream container
Mixing fork
Small bucket
Rags
Small towel
Rubber gloves
Painters Tape
SAFETY ITEMS REQUIRED: Safety Glasses, Closed-toe Shoes

For further assistance or questions, please contact the instructors:

Instructor Name Peggy Jordan at 419 215-1747

Assistant Name Barb Southards at 520 305-0829

FR: Frit Room Reserved for SWAG Sorting - First Friday (10/02/2026)

Fri, 02 Oct 2026 18:00:00 GMT

This is a room reservation notice only. Signups for this activity are done in a separate notice to SWAG-group participants only.

FR Volunteers to Sort SWAG Order First Friday @ 11:00 -2:00 pm (10/02/2026)

Fri, 02 Oct 2026 18:00:00 GMT

Thanks in advance for your help.

CW Equipment Training: Ring Saw Session, Monday 10/05 @ 9:00 - 10:30 am (10/05/2026)

Mon, 05 Oct 2026 16:00:00 GMT

ALL LEVELS

Instructor: Kathy Garceau @ (575) 418-8022

(They may not all be in operation at the time of your training, but we will discuss and answer questions about the various ones.)

This training will also include step-by-step instruction on how to clean the machines after you have used them.

You may bring a project to practice your cutting. We will provide scrap glass and patterns for you to practice on.

This equipment training does not count toward the one-workshop-per-month.

SG "Let's Make a Teardrop Sun Catcher" 101 - Monday 10/05 & Tuesday 10/06 @ 9:30 - 12:30 pm (10/05/2026)

Mon, 05 Oct 2026 16:30:00 GMT

Workshop level: Beginners in Stain Glass

This workshop is for club members who have joined through mosaics or fused glass and would also like to learn the techniques for stained glass.

You will be taught the copper foiling method and soldering stained glass in this two-day workshop. You will create a 6 x 8” stained glass teardrop sun catcher

You must bring your safety glasses and wear closed toe shoes.

Instructors: Shawneen Schmitt @ 414-659-6689 and Stephanie Andrews @ 520-256-2680.

Cost is $15.00 payable to the instructor on the first day of class.

CL Mosaic 101 - Tuesday 10/06 & Friday 10/09 @ 9:30 - 12:30 pm (10/06/2026)

Tue, 06 Oct 2026 16:30:00 GMT

Beginner Level: This workshop is for those members who entered the Glass Club through Intro to Fusing or Intro to Stained Glass.

Glass and flagstone will be provided by the club. The club will also provide the tools to use in this workshop.

Member cost is $15.00.

Please contact the instructor for additional information:

Instructor: Lynn Daniels-Anderson @ 541-729-7773

Asst Instructor: Jim Owens @ 928-202-1623

SG "Let's Make a Teardrop Sun Catcher" 101 - Monday 10/05 & Tuesday 10/06 @ 9:30 - 12:30 pm (10/06/2026)

Tue, 06 Oct 2026 16:30:00 GMT

Workshop level: Beginners in Stain Glass

This workshop is for club members who have joined through mosaics or fused glass and would also like to learn the techniques for stained glass.

You will be taught the copper foiling method and soldering stained glass in this two-day workshop. You will create a 6 x 8” stained glass teardrop sun catcher

You must bring your safety glasses and wear closed toe shoes.

Instructors: Shawneen Schmitt @ 414-659-6689 and Stephanie Andrews @ 520-256-2680.

Cost is $15.00 payable to the instructor on the first day of class.

CL FUSING 101 10/07, 9:30-12:30pm (10/07/2026)

Wed, 07 Oct 2026 16:30:00 GMT

Beginner: Learning how to cut basic shapes and follow a line; familiar with basic tools and supplies. Fusers understand full, contour, tack, slump firing programs.

This class is for members who joined through Mosaics and Stained Glass only. You learn how to fuse glass into a Birdhouse. All tools and glass are provided for this class only

Please bring:

* Safety Items:, Safety glasses, Closed-toe shoes, Band-aids

*Fee for class $15.00 payable to teacher at beginning of class

For further assistance or questions, please contact the instructors:

Instructor Name: Linda Reed 425-231-3571

FR Finance Committee Meeting Friday 10/09 @ 9:00 - 11:00 am (10/09/2026)

Fri, 09 Oct 2026 16:00:00 GMT

Finance Committee Meeting in Frit Room....

CL Mosaic 101 - Tuesday 10/06 & Friday 10/09 @ 9:30 - 12:30 pm (10/09/2026)

Fri, 09 Oct 2026 16:30:00 GMT

Beginner Level: This workshop is for those members who entered the Glass Club through Intro to Fusing or Intro to Stained Glass.

Glass and flagstone will be provided by the club. The club will also provide the tools to use in this workshop.

Member cost is $15.00.

Please contact the instructor for additional information:

Instructor: Lynn Daniels-Anderson @ 541-729-7773

Asst Instructor: Jim Owens @ 928-202-1623

RA Tile Saw Cutting and Training, Monday 10/12 @ 9:00 - 10:30 am (10/12/2026)

Mon, 12 Oct 2026 16:00:00 GMT

WORKSHOP LEVELS

Instructor: Kathy Garceau @ (575) 418 8022

Intermediate/Advanced: If you have attended this training before and you have created more items that need cutting, please feel free to sign up for a time slot.

Workshop location: Ramada

Time Slot scheduling: Please schedule yourself in one of the 15-minute sessions.

Learn to cut pattern bars (7 layers thick, fused glass bar) or scrap boxes (1/2” fused glass bar). **PLEASE DO NOT BRING UNFUSED SINGLE SHEETS OF GLASS OR FUSED GLASS THAT IS ONLY 2 LAYERS THICK.

Please bring a magic marker for measuring and Vaseline to cover the lines before cutting.

This equipment training does not count toward the one-workshop-per-month.

CL Mosaic Birdhouse Friday 10/02 & Tuesday 10/13 @ 9:30 - 12:30 pm (10/13/2026)

Tue, 13 Oct 2026 16:30:00 GMT

Workshop Level - Intermediate: Able to design and create simple projects with minimal guidance; trained on all studio equipment.

General supplies to bring to class:

Day One:

Glass cutting tools: Toyo Cutter, Running Pliers, Grozers, Nippers, Cutting Surface (Quilt-type mats work best)
Glues: Weldbond Glue
Writing Tools: Black Sharpies (fine and regular), Pen & Pencil
Rags
Tweezers
Painters Tape
SAFETY ITEMS REQUIRED: Safety Glasses, Closed-toe Shoes

Day Two:

Small container such as yogurt or sour cream container
Mixing fork
Small bucket
Rags
Small towel
Rubber gloves
Painters Tape
SAFETY ITEMS REQUIRED: Safety Glasses, Closed-toe Shoes

For further assistance or questions, please contact the instructors:

Instructor Name Peggy Jordan at 419 215-1747

Assistant Name Barb Southards at 520 305-0829

ST Board Meeting Thursday 10/15 @ 10:00 am to noon (10/15/2026)

Thu, 15 Oct 2026 17:00:00 GMT

GVR Glass Art Club Board Meeting

FR Glass Swap and Sell - Thursday 10/15 @ 12:30 - 2:30 pm (10/15/2026)

Thu, 15 Oct 2026 19:30:00 GMT

Glass Swap & Sale in Frit Room....

Stop in and leave with something new!

CR Equipment Training: Drill Press Sessions, Monday 10/19 @ 9:00 - 10:30 am (10/19/2026)

Mon, 19 Oct 2026 16:00:00 GMT

ALL LEVELS

Instructors: Anna Parker @ (503) 260-7166.

Whether you are a new member or a member who needs a refresher session, please join us for this training to learn all about the drill press and how to use it for your glass art projects.

We will use both the 1/8” & 1/4” size bits. **PLEASE REMEMBER TO BRING YOUR OWN DRILL BITS TO THE CLASS. Both the 1/8” and 1/4” can be purchased in the store.

This equipment training does not count toward the one-workshop-per-month.

FR,3D Fossil Vitro, Thurs.10/22, 12:30-2:30, & Thurs. 10/29, 12:30-1;30 (10/22/2026)

Thu, 22 Oct 2026 19:30:00 GMT

INTERMEDIATE AND ABOVE WORKSHOP:

Intermediate: Able to design and create simple projects with minimal guidance; trained on all studio equipment. Fusers are learning about special firing programs.

Fossil Vitra is the process of layering powdered frit on a dried leaf, fern or flower and firing until the organic matter burns away and a frit impression is left on the glass. It is helpful if you have had experience using powder frit.

On a 9x12 tile you will make two 5x7 pieces to put in a frame.

In preparation, choose leaves, ferns or flowers, flatten them and dry them for at least a week before the workshop. The flatter the plants, the easier it will be for the frit to stay in place

Opalescent frit gives the greatest effect.

You must wear a P100 mask- no substitutes!

You may bring your own frit, or you may use the instructors' for a $2 charge.

Custom frames that accommodate the 2 panels of glass will also be available to purchase for $15 (frame purchase is limited to class participants at this time). In addition please bring:

2 pieces of clear glass that are 5x7

9x12 tile and papyrus to cover the tile

Dried flat ferns, flowers, or leaves

Powdered frit, if you have it; or use the instructors for $2 cash

Tweezers, paint brush, plastic spoons

Frit tools, if you have them: Red frit sifters, funnel, vacuum

Aerosol hair spray (unscented)

On day one you will create your design and fuse it. On day two you assemble your frame to complete the project

You will pay for the firing of the 9x12 tile on day one

General supplies to bring to class:

* Glass cutting tools: Toyo Cutter, Running Pliers, Grozers, Nippers, Cutting Surface (Quilt-type mats work best)

* Glues: Elmer’s (clear or white), Needle nosed bottle with non-aerosol hairspray

* Writing Tools: Black Sharpies (fine and regular), Pen & Pencil

* Other helpful items:Tweezers, Toothpicks, A carrying box for projects

* Safety Items: P-100 Mask, Safety glasses, Closed-toe shoes, Band-aids

* Bring a firing ticket!

For further assistance or questions, please contact the instructors:

Instructor Name: Peggy Cermak at 612-916-3311

Assistant Name:

CL-Intro Fused Glass Register Through GVR 9:30 - 2:00 PM (10/26/2026)

Mon, 26 Oct 2026 07:00:00 GMT

Registration through GVR

CL-Intro Fused Glass Register Through GVR 9:30 - 2:00 PM (10/27/2026)

Tue, 27 Oct 2026 07:00:00 GMT

Registration through GVR

FR,3D Fossil Vitro, Thurs.10/22, 12:30-2:30, & Thurs. 10/29, 12:30-1;30 (10/29/2026)

Thu, 29 Oct 2026 19:30:00 GMT

INTERMEDIATE AND ABOVE WORKSHOP:

Intermediate: Able to design and create simple projects with minimal guidance; trained on all studio equipment. Fusers are learning about special firing programs.

On a 9x12 tile you will make two 5x7 pieces to put in a frame.

In preparation, choose leaves, ferns or flowers, flatten them and dry them for at least a week before the workshop. The flatter the plants, the easier it will be for the frit to stay in place

Opalescent frit gives the greatest effect.

You must wear a P100 mask- no substitutes!

You may bring your own frit, or you may use the instructors' for a $2 charge.

Custom frames that accommodate the 2 panels of glass will also be available to purchase for $15 (frame purchase is limited to class participants at this time). In addition please bring:

2 pieces of clear glass that are 5x7

9x12 tile and papyrus to cover the tile

Dried flat ferns, flowers, or leaves

Powdered frit, if you have it; or use the instructors for $2 cash

Tweezers, paint brush, plastic spoons

Frit tools, if you have them: Red frit sifters, funnel, vacuum

Aerosol hair spray (unscented)

On day one you will create your design and fuse it. On day two you assemble your frame to complete the project

You will pay for the firing of the 9x12 tile on day one

General supplies to bring to class:

* Glass cutting tools: Toyo Cutter, Running Pliers, Grozers, Nippers, Cutting Surface (Quilt-type mats work best)

* Glues: Elmer’s (clear or white), Needle nosed bottle with non-aerosol hairspray

* Writing Tools: Black Sharpies (fine and regular), Pen & Pencil

* Other helpful items:Tweezers, Toothpicks, A carrying box for projects

* Safety Items: P-100 Mask, Safety glasses, Closed-toe shoes, Band-aids

* Bring a firing ticket!

For further assistance or questions, please contact the instructors:

Instructor Name: Peggy Cermak at 612-916-3311

Assistant Name:

SG-Intro Stained Glass Register Through GVR Class time 9:30 AM to 12:30 PM (11/02/2026)

Mon, 02 Nov 2026 07:00:00 GMT

Registration through GVR

CR Equipment Training: Drill Press Sessions, Monday 11/02 @ 9:00 - 10:30 am (11/02/2026)

Mon, 02 Nov 2026 16:00:00 GMT

ALL LEVELS

Instructors: Anna Parker @ (503) 260-7166.

Whether you are a new member or a member who needs a refresher session, please join us for this training to learn all about the drill press and how to use it for your glass art projects.

We will use both the 1/8” & 1/4” size bits. **PLEASE REMEMBER TO BRING YOUR OWN DRILL BITS TO THE CLASS. Both the 1/8” and 1/4” can be purchased in the store.

This equipment training does not count toward the one-workshop-per-month.

SG-Intro Stained Glass Register Through GVR Class time 9:30 AM to 12:30 PM (11/03/2026)

Tue, 03 Nov 2026 07:00:00 GMT

Registration through GVR

CL-Intro Fused Glass Register Through GVR 9:30 - 2:00 PM (11/03/2026)

Tue, 03 Nov 2026 07:00:00 GMT

Registration through GVR

SG-Intro Stained Glass Register Through GVR Class time 9:30 AM to 12:30 PM (11/04/2026)

Wed, 04 Nov 2026 07:00:00 GMT

Registration through GVR

CL-Intro to Mosaics Register Through GVR Class time 9:30 AM to 12:30 PM (11/04/2026)

Wed, 04 Nov 2026 07:00:00 GMT

Registration through GVR

CL-Intro to Mosaics Register Through GVR Class time 9:30 AM to 12:30 PM (11/05/2026)

Thu, 05 Nov 2026 07:00:00 GMT

Registration through GVR

FR: Frit Room Reserved for SWAG Sorting - First Friday (11/06/2026)

Fri, 06 Nov 2026 18:00:00 GMT

This is a room reservation notice only. Signups for this activity are done in a separate notice to SWAG-group participants only.

FR Volunteers to Sort SWAG Order First Friday @ 11:00 -2:00 pm (11/06/2026)

Fri, 06 Nov 2026 18:00:00 GMT

Thanks in advance for your help.

CL-Intro to Mosaics Register Through GVR Class time 9:30 AM to 12:30 PM (11/07/2026)

Sat, 07 Nov 2026 07:00:00 GMT

Registration through GVR

CW Equipment Training: Ring Saw Session, Monday 11/09 @ 9:00 - 10:30 am (11/09/2026)

Mon, 09 Nov 2026 16:00:00 GMT

ALL LEVELS

Instructor: Kathy Garceau @ (575) 418-8022

(They may not all be in operation at the time of your training, but we will discuss and answer questions about the various ones.)

This training will also include step-by-step instruction on how to clean the machines after you have used them.

You may bring a project to practice your cutting. We will provide scrap glass and patterns for you to practice on.

This equipment training does not count toward the one-workshop-per-month.

SG 101 "Let's Make a Teardrop Sun Catcher" - Monday 11/09 & Tuesday 11/10 @ 9:30 - 12:30 pm (11/09/2026)

Mon, 09 Nov 2026 16:30:00 GMT

Workshop level: Beginners in Stain Glass

This workshop is for club members who have joined through mosaics or fused glass and would also like to learn the techniques for stained glass.

You will be taught the copper foiling method and soldering stained glass in this two-day workshop. You will create a 6 x 8” stained glass teardrop sun catcher

You must bring your safety glasses and wear closed toe shoes.

Instructors: Shawneen Schmitt @ 414-659-6689 and Marilyn Oliviera @ 510-335-8277.

Cost is $15.00 payable to the instructor on the first day of class.

SG 101 "Let's Make a Teardrop Sun Catcher" - Monday 11/09 & Tuesday 11/10 @ 9:30 - 12:30 pm (11/10/2026)

Tue, 10 Nov 2026 16:30:00 GMT

Workshop level: Beginners in Stain Glass

This workshop is for club members who have joined through mosaics or fused glass and would also like to learn the techniques for stained glass.

You will be taught the copper foiling method and soldering stained glass in this two-day workshop. You will create a 6 x 8” stained glass teardrop sun catcher

You must bring your safety glasses and wear closed toe shoes.

Instructors: Shawneen Schmitt @ 414-659-6689 and Marilyn Oliviera @ 510-335-8277.

Cost is $15.00 payable to the instructor on the first day of class.

Studio reserved for Kiln Operators Meeting Thursday 11/12 @ 9:00 am (11/12/2026)

Thu, 12 Nov 2026 16:00:00 GMT

Studio reserved for Kiln Operators Meeting....

CL NMO Website Orientation, Saturday 11/14 @ 11:00 - noon (11/14/2026)

Sat, 14 Nov 2026 18:00:00 GMT

In the session we will focus on the members only section of the website:

Your Profile - editing/updating
Calendar – signing up for events & registration policies
New Member "Start Here" page
Mold Catalog - Search capability
Member Forums – what they are, subscribing to forums you are interested in
Volunteering - Opportunities for new members, recording Volunteer hours
Glass Art Galleries – pictures of inspiration
Online Library – what information is there

Followed by a short Q&A session

To get full benefit from this session:

Bring your device (phone, ipad, laptop) that you use to access the website (no desktops!)
Know your website password – see below for help in advance

This website orientation does not count toward the one-workshop-per-month.

If you need help registering for this event because you can’t get on the website, please email the calendar administrators at events.gvrgac@gmail.com to register.

If you need help signing into the website, please email Alice at amckenzie@aol.com to set up a 10 minute session for private help prior to the session.

CL NMO Website Orientation, Tuesday 11/17 @ 10:00 - noon (11/17/2026)

Tue, 17 Nov 2026 17:00:00 GMT

In the session we will focus on the members only section of the website:

Your Profile - editing/updating
Calendar – signing up for events & registration policies
New Member "Start Here" page
Mold Catalog - Search capability
Member Forums – what they are, subscribing to forums you are interested in
Volunteering - Opportunities for new members, recording Volunteer hours
Glass Art Galleries – pictures of inspiration
Online Library – what information is there

Followed by a short Q&A session

To get full benefit from this session:

Bring your device (phone, ipad, laptop) that you use to access the website (no desktops!)
Know your website password – see below for help in advance

This website orientation does not count toward the one-workshop-per-month.

If you need help registering for this event because you can’t get on the website, please email the calendar administrators at events.gvrgac@gmail.com to register.

If you need help signing into the website, please email Alice at amckenzie@aol.com to set up a 10 minute session for private help prior to the session.

RA Tile Saw Cutting and Training, Monday 11/23 @ 9:00 - 10:30 am (11/23/2026)

Mon, 23 Nov 2026 16:00:00 GMT

WORKSHOP LEVELS

Instructor: Anna Parker (503) 260-7166

Intermediate/Advanced: If you have attended this training before and you have created more items that need cutting, please feel free to sign up for a time slot.

Workshop location: Ramada

Time Slot scheduling: Please schedule yourself in one of the 15-minute sessions.

Learn to cut pattern bars (7 layers thick, fused glass bar) or scrap boxes (1/2” fused glass bar). **PLEASE DO NOT BRING UNFUSED SINGLE SHEETS OF GLASS OR FUSED GLASS THAT IS ONLY 2 LAYERS THICK.

Please bring a magic marker for measuring and Vaseline to cover the lines before cutting.

This equipment training does not count toward the one-workshop-per-month.

CL Mosaic 101 - Tuesday 12/01 & Friday 12/04 @ 9:30 - 12:30 pm (12/01/2026)

Tue, 01 Dec 2026 16:30:00 GMT

Beginner Level: This workshop is for those members who entered the Glass Club through Intro to Fusing or Intro to Stained Glass.

Glass and flagstone will be provided by the club. The club will also provide the tools to use in this workshop.

Member cost is $15.00.

Please contact the instructor for additional information:

Instructor: Lynn Daniels-Anderson @ 541-729-7773

Asst Instructor: Jim Owens @ 928-202-1623

CL FUSING 101, Wednesday 12/2, 9:30-12:30pm (12/02/2026)

Wed, 02 Dec 2026 16:30:00 GMT

Beginner: Learning how to cut basic shapes and follow a line; familiar with basic tools and supplies. Fusers understand full, contour, tack, slump firing programs.

This class is for members who joined through Mosaics and Stained Glass only. You learn how to fuse glass into a Birdhouse. All tools and glass are provided for this class only

Please bring:

* Safety Items:, Safety glasses, Closed-toe shoes, Band-aids

*Fee for class $15.00 payable to teacher at beginning of class

For further assistance or questions, please contact the instructors:

Instructor Name: Linda Reed 425-231-3571

CL Mosaic 101 - Tuesday 12/01 & Friday 12/04 @ 9:30 - 12:30 pm (12/04/2026)

Fri, 04 Dec 2026 16:30:00 GMT

Beginner Level: This workshop is for those members who entered the Glass Club through Intro to Fusing or Intro to Stained Glass.

Glass and flagstone will be provided by the club. The club will also provide the tools to use in this workshop.

Member cost is $15.00.

Please contact the instructor for additional information:

Instructor: Lynn Daniels-Anderson @ 541-729-7773

Asst Instructor: Jim Owens @ 928-202-1623

FR: Frit Room Reserved for SWAG Sorting - First Friday (12/04/2026)

Fri, 04 Dec 2026 18:00:00 GMT

This is a room reservation notice only. Signups for this activity are done in a separate notice to SWAG-group participants only.

FR Volunteers to Sort SWAG Order First Friday @ 11:00 -2:00 pm (12/04/2026)

Fri, 04 Dec 2026 18:00:00 GMT

Thanks in advance for your help.

CW Equipment Training: Ring Saw Session, Monday 12/07 @ 9:00 - 10:30 am (12/07/2026)

Mon, 07 Dec 2026 16:00:00 GMT

ALL LEVELS

Instructor: Kathy Garceau @ (575) 418 8022

(They may not all be in operation at the time of your training, but we will discuss and answer questions about the various ones.)

This training will also include step-by-step instruction on how to clean the machines after you have used them.

You may bring a project to practice your cutting. We will provide scrap glass and patterns for you to practice on.

This equipment training does not count toward the one-workshop-per-month.

Anza Room Glass Artist Club Annual Meeting Friday 12/11 @ 2:00 - 5:00 pm (12/11/2026)

Fri, 11 Dec 2026 21:00:00 GMT

GVR Glass Art Club Annual Meeting

Come celebrate the end of the year at the Glass Artists Club Annual Meeting and social Saturday December 11, 2026 in the Anza Room at Santa Rita Springs GVR Center, right above our studio.

Please bring an appetizer or dessert of your choice if you want. Club provides water and coffee, anything else please BYOB.

We will have our annual reports with slides, results of the board of directors election, volunteer recognition, and door prizes throughout the afternoon of a collection of amazing items, including gifts from our generous friends at Southwest Art Glass.

Parking is available above and behind our complex with a bridge leading directly to the Anza Room upstairs.

We will be collecting non-perishable food for our local food banks to help our neighbors in need, dog and cat food is also needed. A collection bin is in lobby of our studio now and day of meeting we will have collection boxes available in the Anza Room.

Looking forward to seeing all our new and existing members to have fun and celebrate!

RA Tile Saw Cutting and Training, Monday 12/14 @ 9:00 - 10:30 am (12/14/2026)

Mon, 14 Dec 2026 16:00:00 GMT

WORKSHOP LEVELS

Instructor: Anna Parker (503) 260-7166

Intermediate/Advanced: If you have attended this training before and you have created more items that need cutting, please feel free to sign up for a time slot.

Workshop location: Ramada

Time Slot scheduling: Please schedule yourself in one of the 15-minute sessions.

Learn to cut pattern bars (7 layers thick, fused glass bar) or scrap boxes (1/2” fused glass bar). **PLEASE DO NOT BRING UNFUSED SINGLE SHEETS OF GLASS OR FUSED GLASS THAT IS ONLY 2 LAYERS THICK.

Please bring a magic marker for measuring and Vaseline to cover the lines before cutting.

This equipment training does not count toward the one-workshop-per-month.

CR Equipment Training: Drill Press Sessions, Monday 12/21 @ 9:00 - 10:30 am (12/21/2026)

Mon, 21 Dec 2026 16:00:00 GMT

ALL LEVELS

Instructor: Anna Parker @ (503) 260-7166.

Whether you are a new member or a member who needs a refresher session, please join us for this training to learn all about the drill press and how to use it for your glass art projects.

We will use both the 1/8” & 1/4” size bits. **PLEASE REMEMBER TO BRING YOUR OWN DRILL BITS TO THE CLASS. Both the 1/8” and 1/4” can be purchased in the store.

This equipment training does not count toward the one-workshop-per-month.

GVR Glass Artists Club upcoming events

NMO -Designing a Soap/Sponge Dish, Saturday, 8/15, 10:30-1:30 (08/15/2026)

CR Lap Grinder Training, Monday 08/17 @ 9:30 - 11:00 am (08/17/2026)

CR Lap Grinding Open Hour, Monday 08/17 @ 11:00-12:00 pm (08/17/2026)

CL-Intro to Mosaics Register Through GVR Class time 9:30 AM to 12:30 PM (08/18/2026)

SG Abstract Geometric Desert Scene Tuesday, August 11 & 18 @ 9:30 - 12:30 pm (08/18/2026)

CL-Intro to Mosaics Register Through GVR Class time 9:30 AM to 12:30 PM (08/19/2026)

SG Stained Glass Iris Heart Wednesdays 08/19 & 08/26 @ 9:30 - 12:30 pm (08/19/2026)

ST Let's Make Holiday Items to Sell Thursday August 20 @ 9:00 - 12:00 pm (08/20/2026)

**** CANCELLED **** ST Board Meeting Thursday 08/20 @ 10:00 am to noon (08/20/2026)

FR Glass Swap and Sell - Thursday 08/20 @ 12:30 - 2:30 pm (08/20/2026)

CL-Intro to Mosaics Register Through GVR Class time 9:30 AM to 12:30 PM (08/21/2026)

Colorful 6" Hanging Pinwheel, Saturday, 8/22, 10:30-1:30 (08/22/2026)

CL NMO Website Orientation, Monday 08/24 @ 11:00 - noon (08/24/2026)

CL Mosaic 101 - Tuesday 08/25 & Friday 08/28 @ 9:30 - 12:30 pm (08/25/2026)

Colorful fruit Bowl or Platter, Wednesday, 8/26, 9:30-12:30 (08/26/2026)

SG Stained Glass Iris Heart Wednesdays 08/19 & 08/26 @ 9:30 - 12:30 pm (08/26/2026)

CL Mosaic 101 - Tuesday 08/25 & Friday 08/28 @ 9:30 - 12:30 pm (08/28/2026)

NMO Cutting a Circle to design a Bowl, Saturday, 8/29, 10:30-1:30 (08/29/2026)

FR FREEZE & FUSE, Sat.8/29, 10:30-1 & 3pm (08/29/2026)

FR FREEZE & FUSE, Sat.8/29, 10:30-1 & 3pm (08/29/2026)

SG Project Completion Assistance Monday 08/31 @ 9:30 - 12:30 pm (08/31/2026)

ST GVC Planning Committee Meeting Thursday, 09/03 @ 9:00 - 12:00 pm (09/03/2026)

FR: Frit Room Reserved for SWAG Sorting - First Friday (09/04/2026)

FR Volunteers to Sort SWAG Order First Friday @ 11:00 -2:00 pm (09/04/2026)

CW Equipment Training: Ring Saw Session, Monday 09/07 @ 9:00 - 10:30 am (09/07/2026)

Studio reserved for Kiln Operators Meeting Thursday 09/10 @ 9:00 am (09/10/2026)

FR Finance Committee Meeting Friday 09/11 @ 9:00 - 11:00 am (09/11/2026)

CR Equipment Training: Drill Press Sessions, Monday 09/14 @ 9:00 - 10:30 am (09/14/2026)

SG 101 "Let's Make a Butterfly" - Monday 09/14 & Tuesday 09/15 @ 9:30 - 12:30 pm (09/14/2026)

SG 101 "Let's Make a Butterfly" - Monday 09/14 & Tuesday 09/15 @ 9:30 - 12:30 pm (09/15/2026)

SG Stained Glass Angel Nite Light Wednesday 09/16 & 09/23 @ 9:30 - 12:30 pm (09/16/2026)

ST Board Meeting Thursday 09/17 @ 10:00 am to noon (09/17/2026)

FR Glass Swap and Sell - Thursday 09/17 @ 12:30 - 2:30 pm (09/17/2026)

RA Tile Saw Cutting and Training, Monday 09/21 @ 9:00 - 10:30 am (09/21/2026)

CL, Components, Tuesday, 9/22, 9:30-12:30 (09/22/2026)

SG Project Completion Assistance Tuesday 09/22 @ 9:30 - 12:30 pm (09/22/2026)

SG Stained Glass Angel Nite Light Wednesday 09/16 & 09/23 @ 9:30 - 12:30 pm (09/23/2026)

ST Let's Make Holiday Items to Sell Thursday September 24 @ 9:00 - 12:00 pm (09/24/2026)

CL Mosaic Birdhouse Friday 10/02 & Tuesday 10/13 @ 9:30 - 12:30 pm (10/02/2026)

FR: Frit Room Reserved for SWAG Sorting - First Friday (10/02/2026)

FR Volunteers to Sort SWAG Order First Friday @ 11:00 -2:00 pm (10/02/2026)

CW Equipment Training: Ring Saw Session, Monday 10/05 @ 9:00 - 10:30 am (10/05/2026)

SG "Let's Make a Teardrop Sun Catcher" 101 - Monday 10/05 & Tuesday 10/06 @ 9:30 - 12:30 pm (10/05/2026)

CL Mosaic 101 - Tuesday 10/06 & Friday 10/09 @ 9:30 - 12:30 pm (10/06/2026)

SG "Let's Make a Teardrop Sun Catcher" 101 - Monday 10/05 & Tuesday 10/06 @ 9:30 - 12:30 pm (10/06/2026)

CL FUSING 101 10/07, 9:30-12:30pm (10/07/2026)

FR Finance Committee Meeting Friday 10/09 @ 9:00 - 11:00 am (10/09/2026)

CL Mosaic 101 - Tuesday 10/06 & Friday 10/09 @ 9:30 - 12:30 pm (10/09/2026)

RA Tile Saw Cutting and Training, Monday 10/12 @ 9:00 - 10:30 am (10/12/2026)

CL Mosaic Birdhouse Friday 10/02 & Tuesday 10/13 @ 9:30 - 12:30 pm (10/13/2026)

ST Board Meeting Thursday 10/15 @ 10:00 am to noon (10/15/2026)

FR Glass Swap and Sell - Thursday 10/15 @ 12:30 - 2:30 pm (10/15/2026)

CR Equipment Training: Drill Press Sessions, Monday 10/19 @ 9:00 - 10:30 am (10/19/2026)

FR,3D Fossil Vitro, Thurs.10/22, 12:30-2:30, & Thurs. 10/29, 12:30-1;30 (10/22/2026)

CL-Intro Fused Glass Register Through GVR 9:30 - 2:00 PM (10/26/2026)

CL-Intro Fused Glass Register Through GVR 9:30 - 2:00 PM (10/27/2026)

FR,3D Fossil Vitro, Thurs.10/22, 12:30-2:30, & Thurs. 10/29, 12:30-1;30 (10/29/2026)

SG-Intro Stained Glass Register Through GVR Class time 9:30 AM to 12:30 PM (11/02/2026)

CR Equipment Training: Drill Press Sessions, Monday 11/02 @ 9:00 - 10:30 am (11/02/2026)

SG-Intro Stained Glass Register Through GVR Class time 9:30 AM to 12:30 PM (11/03/2026)

CL-Intro Fused Glass Register Through GVR 9:30 - 2:00 PM (11/03/2026)

SG-Intro Stained Glass Register Through GVR Class time 9:30 AM to 12:30 PM (11/04/2026)

CL-Intro to Mosaics Register Through GVR Class time 9:30 AM to 12:30 PM (11/04/2026)

CL-Intro to Mosaics Register Through GVR Class time 9:30 AM to 12:30 PM (11/05/2026)

FR: Frit Room Reserved for SWAG Sorting - First Friday (11/06/2026)

FR Volunteers to Sort SWAG Order First Friday @ 11:00 -2:00 pm (11/06/2026)

CL-Intro to Mosaics Register Through GVR Class time 9:30 AM to 12:30 PM (11/07/2026)

CW Equipment Training: Ring Saw Session, Monday 11/09 @ 9:00 - 10:30 am (11/09/2026)

SG 101 "Let's Make a Teardrop Sun Catcher" - Monday 11/09 & Tuesday 11/10 @ 9:30 - 12:30 pm (11/09/2026)

SG 101 "Let's Make a Teardrop Sun Catcher" - Monday 11/09 & Tuesday 11/10 @ 9:30 - 12:30 pm (11/10/2026)

Studio reserved for Kiln Operators Meeting Thursday 11/12 @ 9:00 am (11/12/2026)

CL NMO Website Orientation, Saturday 11/14 @ 11:00 - noon (11/14/2026)

CL NMO Website Orientation, Tuesday 11/17 @ 10:00 - noon (11/17/2026)

RA Tile Saw Cutting and Training, Monday 11/23 @ 9:00 - 10:30 am (11/23/2026)

CL Mosaic 101 - Tuesday 12/01 & Friday 12/04 @ 9:30 - 12:30 pm (12/01/2026)

CL FUSING 101, Wednesday 12/2, 9:30-12:30pm (12/02/2026)

CL Mosaic 101 - Tuesday 12/01 & Friday 12/04 @ 9:30 - 12:30 pm (12/04/2026)

FR: Frit Room Reserved for SWAG Sorting - First Friday (12/04/2026)

FR Volunteers to Sort SWAG Order First Friday @ 11:00 -2:00 pm (12/04/2026)

CANCELLED ST Board Meeting Thursday 08/20 @ 10:00 am to noon (08/20/2026)